01384 900 264

Remote control handset and keyfob transmitters for
electric garage door and gate operators by mail order

Secure On-Line Shopping and Same-Day despatch

Items in Basket:        Total Price:

Genuine BFT gate & garage door transmitters

BFT MITTO2 two channel keyfob
for individual control of up to two BFT 433Mhz receivers
dimensions: 65mm x 42mm x 15mm
uses one LR23A battery

discontinued & replaced by the new MITTO B RCB2 (see below)

MITTO4 keyfob

BFT MITTO4 four channel keyfob
for individual control of up to four BFT 433Mhz receivers
dimensions: 65mm x 42mm x 15mm
LR23A battery included

Discontinued.

Note: the MITTO4 case style is no longer in production so when our
current stocks are exhausted the new MITTO B RCB4 will be supplied
(as MITTO B RCB2 illustrated below)

BFT MITTO B RCB2 two channel keyfob
for individual control of up to two BFT 433Mhz receivers
dimensions: 62mm x 38mm x 15mm
LR23A battery included

Direct replacement for BFT MITTO2 & TRC2 (illustrated above)


price for one: £ excl. VAT
2-4 qty price: £ each
5+ qty price: £ each

Quantity Discounts are calculated automatically
(just enter the quantity required and click 'Buy Now')

TE 433Mhz series binary code keyfob transmitters
TE01 & TE02 = 66mm x 35mm x 13mm approx.
The radio transmission frequency of BFT 'TE' series keyfobs
can be determined by the yellow colour of the push-buttons

The above transmitters are discontinued but the four channel version
(TE04) can be used as a direct replacement (just ignore the extra buttons)

TEO4 433Mhz - four buttons
Discontinued, please contact us for a suitable replacement.

Programming a new transmitter
BFT 'TE' series transmitters use DIP switch type security coding and have ten binary switches inside the battery compartment to set the security code to one of 1024 combinations.  To programme an additional transmitter, open your original keyfob transmitter and note the positions of the ten switches inside, then open your new keyfob and set the positions of the ten switches inside to the same sequence as those in your original keyfob.

GT 418Mhz series keyfob transmitters
GT01 & GT02 = 66mm x 35mm x 13mm approx.
(identified by turquoise buttons)
GTO1 one button - discontinued - no alternative type available
GTO2 two buttons - discontinued         "
GTO4 four buttons - discontinued         "

Note: 418Mhz transmitters have been discontinued because this frequency was withdrawn from public use by the Home Office in December 2007 and re-allocated to the European TETRA radio system for the emergency services. (see the Radiocommunications Agency website for details)

www.garage-door-remotes.co.uk are a specialist
mail order supplier of remote control transmitters

We do not supply any other BFT transmitter
types or other spares for BFT equipment

Batteries & Accessories
(quantity discount available on batteries,
enter quantity required to display)

Click image to enlarge	12 Volt Alkaline battery type GP23A (alt. ref 23AE) (equivalent to types: LRV08, 8LR932, MN21, V23GA, E23A, LR23A) price £ excl. VAT Qty:
	Two 3 Volt Lithium 'coin' batteries type CR2016 (two used in some MITT02 keyfobs) price (for two) £ excl. VAT Qty:
	Domino external digital numeric entry system The DOMINO keyless digital entry system is a simple and secure way to open and close your garage door without the need for a key or remote control (three 'AA' batteries included) Our Ref: GD-1 price £ excl. VAT
We have a convenient keyfob style radio upgrade kit to suit gate & garage door systems Click Here For Details A replacement for the obsolete receiver on most gate & garage door operators

Same day despatch on orders submitted by 3pm
Next-day delivery also available*
(*on orders placed Mon to Thurs only)

choose 'next-day' delivery at the checkout

•  Radio Receiver Upgrade  •
•  Spares &  Accessories  •  Door Security  •
•  Site Index   •   Home Page   •   Contact Us   •