|
CAME Ref: AT01
single channel keyfob
|
CAME Ref: AT01
two channel keyfob
(can provide individual control
of
up to two doors or gates) |
CAME Ref: AT04
four channel keyfob
(can provide individual control
of up to four doors or gates) |
Programming a new ATOMO series transmitter from an existing working transmitter
Step1/ Take an existing ATOMO series transmitter
that currently operates your gate/door, and press the button you wish to
clone (copy) for approx 15 seconds until the LED stays illuminated.
Step 2/ Within 20 seconds of step 1, take the new ATOMO
series transmitter and press the button you wish to program, wait a further 20 seconds before attempting to use it to operate your door/gate
To programme another channel repeat steps 1 to 2 above.
(up to 25 transmitters can be assigned to each receiver)
Note: ATOMO keyfobs are compatible with the following CAME rolling
code
systems only: RE432RC & RBE4RC receivers and AF43SR* card
(*if used
with the AF43SR card, refer to documentation for activation)
To order additional ATOMO series transmitters
Click here
01384 900 264
*
*
